| 静电喷塑高温固化 |
| 添加时间：2019/8/17 11:28:41 浏览次数： |
| 高温固化 High temperature curing 目的：将工件表面的粉末涂料加热到规定的温度并保温相应的时间，使之熔化、流平、固化，从而得到我们想要的工件表面效果。 OBJECTIVE: To heat the powder coatings on the surface of workpieces to the prescribed temperature and keep them warm for corresponding time, so as to melt, leveling and solidify them, so as to obtain the desired surface effect of workpieces. 工艺步骤： 将喷涂好的工件推入固化炉，加热到预定的温度（一般185度），并保温相应的时间（15分钟）；开炉取出冷却即得到成品。 Process steps: the sprayed workpiece is pushed into the curing furnace, heated to a predetermined temperature (generally 185 degrees), and the corresponding holding time (15 minutes); the finished product is taken out of the furnace and cooled. 提示：加热及控制系统（包括电加热、燃油、燃气、燃煤等各种加热方式） + 保温箱体=固化炉。 Tips: Heating and control system (including electric heating, fuel oil, gas, coal and other heating methods) +thermal insulation box = curing furnace. 相关设备：固化炉。（需要自动控制的参数：温度、保温时间 ，加热方式可以采用电加热、燃油加热、燃气加热、燃煤加热等方式，可以根据您所在地区的能源情况灵活选择）。 Relevant equipment: curing furnace. (The parameters that need automatic control: temperature, holding time, heating mode can adopt electric heating, fuel oil heating, gas heating, coal-fired heating and other ways, according to the energy situation in your region flexible choice). 相关材料：能够控制温度和保温时间在合理范围的高温固化炉（或称烘箱、烤箱）。 Relevant materials: High temperature curing oven (or oven or oven) which can control temperature and holding time in a reasonable range. |
| 上一页 静电喷塑工艺上的原理 |
| 下一页 静电喷塑机加工能力 |
Copyright © 技术支持：遨游网络