| 静电喷塑机加工能力 |
| 添加时间：2019/8/17 11:11:14 浏览次数： |
| 加工能力 Processing capacity 需要购置高性能的静电喷塑机（静电喷枪）的情况： Need to purchase high-performance electrostatic spraying machine (electrostatic spraying gun): 1、提高喷涂死角的能力，以适应某一种特别难喷的工件。 1. Improve the ability of dead angle of spraying to adapt to a particular kind of work piece which is difficult to spray. 2、提高喷涂工效、提高粉末利用率、提高喷涂产品的成品率。 2. Improve the efficiency of spraying, improve the utilization ratio of powder and improve the yield of spraying products. 3、原有静电喷塑机性能落后或老化，或故障率高，需要更换。 3. The old electrostatic spraying machine is backward or aging, or has a high failure rate, which needs to be replaced. 4、原有静电喷塑机已过保修期，维修费用昂贵或原产厂家转产无法维修。 4. The original electrostatic spraying machine has passed the warranty period, and the maintenance cost is expensive or the original manufacturer can not be repaired. 对于以上情况，可选用性能优秀、质量稳定的多功能静电喷塑机。 For the above situation, multi-functional electrostatic spraying machine with excellent performance and stable quality can be selected. 需要增加或改造粉末回收系统的情况： Where additional or modified powder recovery systems are required: 1、原来没有配备粉末回收系统，喷涂量提高后一方面对车间污染严重，一方面粉末浪费严重。所以需要增加粉末回收系统。 1. There was no powder recovery system in the past. On the one hand, the workshop was polluted seriously and the powder wastage was serious when the spraying quantity was increased. So we need to add powder recovery system. 2、原来使用性能不良的回收系统（如老式的布袋式回收系统），经过长期使用之后性能持续下降，起不到回收系统应有的作用。 2. The original recycling system with poor performance (such as the old bag recycling system), after long-term use, the performance of the recycling system continues to decline, and it can not play its due role. 3、生产规模扩大，需要增加新的工位来提高喷涂生产能力。针对该状况，一些设备商可提供各种规格的全套“脉冲反吹式粉体回收系统”套件，回收系统的参数选择主要参考喷房的尺寸和形状，而喷房的尺寸和形状又取决于喷涂目标工件的尺寸。可选用订做成品的喷房（快速拆装式，节省运输费用）。 3. With the expansion of production scale, new workstations need to be added to improve the spraying production capacity. In view of this situation, some equipment suppliers can provide a complete set of "Pulse Back-Blown Powder Recovery System" kits of various specifications. The parameters of the recovery system mainly refer to the size and shape of the spray chamber, and the size and shape of the spray chamber depends on the size of the spray target workpiece. Choose the spray house of the customized product (quick disassembly and assembly type, save transportation cost). |
| 上一页 静电喷塑高温固化 |
| 下一页 需要增加或改造固化炉的情况 |
Copyright © 技术支持：遨游网络