需要增加或改造固化炉的情况：
Additional or modified solidification furnaces are required:
1、原有固化炉的加热系统落后，或自动控制能力有缺陷（如只有温度控制，没有固化保温时间控制）。
1. The heating system of the original solidification furnace is backward, or the automatic control ability is defective (for example, only temperature control, no solidification holding time control).
2、原有固化炉加热方式能源消耗大，利用率低，成本太高（如电加热固化炉改成燃油加热，或原有的燃煤、燃油等加热方式的结构不合理造成燃料浪费）。
2. The original heating mode of solidification furnace consumes a lot of energy, has low utilization ratio and high cost (for example, the electric heating solidification furnace is converted to oil heating, or the unreasonable structure of the original heating mode of coal and oil causes fuel waste).
3、原有的固化炉尺寸不合适，不能适应多变的加工工件。针对该状况，一些设备商可提供各种加热方式的固化炉自动加热系统，控制功能齐全，热效率高，可以用于固化炉的改造或新建配套，自动加热系统的加热方式有根据实际需要自由选择，及热系统的规格参数会根据固化炉的具体情况计算确定，
3. The original curing furnace size is not suitable and can not adapt to the changeable processing workpiece. In view of this situation, some equipment vendors can provide various heating modes of curing furnace automatic heating system with complete control functions and high thermal efficiency, which can be used for the transformation or new matching of curing furnace. The heating mode of automatic heating system is freely chosen according to actual needs, and the specifications and parameters of the heating system will be based on the curing furnace. The body condition is calculated and determined.
购置自动加热系统后，只要与保温箱体配接，就可以构成各种加热方式的自动控制（温度控制、保温时间控制）固化炉。也可以订做成品的各种固化炉（烘箱），并可以做成块。
After purchasing the automatic heating system, as long as it is connected with the heat preservation box, the solidification furnace of various heating modes can be automatically controlled (temperature control, heat preservation time control). Also can be customized products of various curing ovens (ovens), and can be made into blocks.